Spraying Systems Co 1550+ AutoJet, Руководство пользователя

Страница: 34 / 86

34
For every trigger, the system would receive the trigger signal from the sensor then wait for 2 seconds then spray for exactly
4 seconds. The system would wait for the next trigger signal and repeat the application.
Spray Delay is defined as the time the system waits before starting the Spray Period .
Spray Delay time can be set from 0.000 to 9999.999 seconds.
Spray Period is defined as the time system sprays after the trigger signal and delay time has expired.
Spray Period time can be set from 0.001 to 9999.999 seconds.
To reiterate in the application the sensor or trigger signal is activated, the spray delay time is activated. Once the Start
Delay time is finished the system starts the Spray Period time which actuates the spray nozzle then sprays for the set
amount of time.
Note: The start delay takes precedence over the anticipator time. For example if the anticipator time is set to 2 seconds
and the start delay to 1 sec the spray will still start after a 1 second delay leaving an actual anticipator time of 1 second
Parameters settings for Fixed Spray Time:
Parameter Value
Start delay In seconds
Spray period In seconds. Should be > zero!
Anticipator time In seconds – for use with air atomizing spray nozzles
Follower time In seconds – for use with air atomizing spray nozzles