Spraying Systems Co 1550+ AutoJet, Руководство пользователя

Страница: 56 / 86

56
Extension Cable
If longer length cables are required, we offer an extension cable that is 16.4’ (5m) [Cable P/N LEXXSD4FD4M005P].

This cable can be used to go between the nozzle cable and the junction block or the junction block cable and the
system.
 This cable can also be used to extend the trigger device cable lengths.
o
Note due to voltage drop we recommend keeping the cable length to a reasonable length. Never attempt
to chain more than four (4) cables together. Electric spray nozzle speed and performance will suffer.
o
Panel connection: Main or Trig
o
Part number: LEXXSD4FD4M005P
o
Cable: 16.4 ft. [5 m] cord length
o
Connector – M12 4 pin female
o
Connector – M12 4 pin male
Level Switch Cable Kit
The 1550+ offers a feature to signal your system when a fault has occurred in the operation of the controller. This is wired
as shown in the diagram. To activate this feature, you need to have our optional splitter cable kit.
o
Panel connection: Main and T. int.
o
Kit Number: 040TS04000064W0
o
Adapter: Splitter – M12 (M) x 2 M12 (F) - 3 ft. [1 m] whip cord length
 LE00M12WYE1M
o
Cable: M12 (M) x Flying Leads - 16’4 ft. [5 m]

Connects to one connector on splitter

The flying leads from cable of the kit are to be connected to the customer’s PLC or warning
signal light, +24VDC. (black and white wires)
o
Open connector on splitter

Connect PulsaJet cable; AA250 cable; or Extension cable to this connection.