Spraying Systems Co 1550+ AutoJet, Руководство пользователя

Страница: 29 / 86

29
Setup 2 of 2 Screen
The screen accessed from the Setup screen using the forward button is the second setup screen.
This screen offers four active buttons,
Diagnostic screen, Language settings , About and PulsaJet settings . As well as one
password protected button, System menu. Also, the Reset to factory defaults button.
System menu takes you to the HMI manufacturers setting screen, this is not used during normal operation and is password
protected (password is 60189). About takes you to an information screen detailing the hardware and software versions.
Reset to factory defaults clears all of your current inputs and settings. The controller will verify that is your intent by
opening this window.
X to cancel check to reset.
Diagnostics Screen
The Diagnostic screen is used to validate signals and settings of the system as it is running.
By using this screen you’ll be able to determine if your trigger signal is being seen as well as the status of other digital and
analog signals. This is useful for troubleshooting and first setting up the system.