Spraying Systems Co 1550+ AutoJet, Руководство пользователя

Страница: 23 / 86

23
o
Open the pump air shut off valve (small handled ball valve) just enough until the pump begins to slowly cycle. Allow
the pump to cycle slowly until the pump is primed. (1-4 hz)
o
It may be necessary to reduce the pump air pressure slightly to prime pump.
o
Pump is self-priming, so it can be above the level of the liquid (max. 5 ft./1.5m) during the priming process
but keep this to a minimum for priming if possible.
HMI Operation - Set Spray Parameters
HMI
The 1550+ features an HMI (Human Machine Interface) that is a 4.3” touch screen. Review the following screen
explanations thoroughly to understand your 1550+ Spray Controller.
Home screen
On the home screen you enter your operating parameters. These parameters change based on the timing mode selected.
Note the underlined text like “Duty Cycle” the underline represents a hyperlink that provides more information regarding
that parameter. Touch the text and a new window opens.
Touch the new window to return to the home screen.
Operating
Parameters
Text is a value
set on another
screen
Input Box
(Light blue background)
Setup Screen
button
Manual trigger
button
Detailed
explanation