Spraying Systems Co 1550+ AutoJet, Руководство пользователя

Страница: 24 / 86

24
Touching the Input box opens a Numeric keypad screen to enter your parameters.
Note the red text “ 0.00 ~ 100.00 ” this indicates the minimum and maximum values you can enter for the parameter
selected. These limits vary by parameter. Enter your required selection then hit “Enter” to set the parameter and return to
the home screen.
Setup Screen
To get to the Setup screen press the Setup button on the home screen.
The Setup Screen is used to select the timing mode, the Anticipator and Follower times, the Maximum Frequency in cycles
per minute, the Duty Cycle input, and Trigger input and if a level sensor input is to be used.
There are three timing modes available, they are explained in sections Spray Instructions Simplified & Timing Modes.
Minimum to
maximum values
Press Enter to set
value
Press
Touch to see modes.
Then touch text to select.
Touch to advance to next
screen.
Touch to go to home
screen