Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
65(113)
4.21
Camera Module
4.21.1
Camera Module Removal
•
Perform all sections of the Flip Disassembly
Tools needed to perform the following steps:
•
Pry Tool
*
ESD tweezers
NOTE! A “ * ” beside a tool listed above indicates that the tool is not specifically called out in the
following instructions, but an operator may find it helpful to use that tool when performing some
steps of the following procedure.
NOTE!
Whenever the phrase “pry tool” is used, a nylon pointer, an orange stick, or a front opening tool
may be used, depending on the user’s preference.
Step-by-Step Instructions
1.
Orient the flip assembly so that the inner surface of
the inner flip cover is towards you and the hinge is
oriented to the bottom.
2.
Locate the camera module’s connection to the main
flex film.
3.
Disconnect the camera module’s flex film from the
mating connector on the main flex film by rotating
the black retaining bar of the connector towards the
camera module’s flex film into a vertical position
using a pry tool.
4.
Once the black retaining bar of the connector has
been rotated up into a vertical position, pull the
camera connection portion of the main flex film
assembly directly away from the camera flex film to
disconnect the camera module.
