Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
85(113)
4.30.2
Rear Speaker Cloth Installation
Tools needed to perform the following steps:
*
Style 2A ESD tweezers
NOTE! A “ * ” beside a tool listed above indicates that the tool is not specifically called out in the
following instructions, but an operator may find it helpful to use that tool when performing some
steps of the following procedure.
Step-by-Step Instructions
1.
Obtain a new rear speaker cloth and remove the
protective backing.
2.
Orient the rear speaker cloth so that the features in
the rear speaker cloth correspond to the
corresponding alignment features on the antenna
assembly.
3.
Place the rear speaker cloth over the rear speaker and
carefully smooth it into place so that a good bond is
formed between the rear speaker cloth and antenna
assembly.
•
Perform the Antenna Assembly Installation Procedure
•
Perform sections 2.2.3 - 2.2.5 of the Base Reassembly Procedure
