Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
87(113)
Step-by-Step Instructions
3.
Remove any remaining residue from the bottom of
the speaker cavity and the area where the contact
portion of the flex film attaches to the antenna
assembly.
4.31.2
Rear Speaker Installation
Tools needed to perform the following steps:
None
Step-by-Step Instructions
1.
Obtain a new rear speaker assembly and a new
adhesive ring for the speaker.
2.
Orient the adhesive ring relative to the speaker so
that the adhesive ring will be applied to the metal
side of the speaker assembly.
3.
Align the notch in the adhesive ring with the notch in
the edge of the speaker assembly.
4.
Place the adhesive ring onto the speaker assembly so
that it is located between the outer ring of holes and
the outer edge of the speaker.
5.
Once the speaker has been placed, rub over the entire
adhesive ring so that a good bond forms between the
adhesive and the speaker assembly.
