Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
40(113)
4.8.2
RF Port Plug Installation
If this part is being replaced, a new part should be used in the place of the old part when the
following steps are being performed.
Tools needed to perform the following steps:
*
Style 2A ESD tweezers
NOTE! A “ * ” beside a tool listed above indicates that the tool is not specifically called out in the
following instructions, but an operator may find it helpful to use that tool when performing some
steps of the following procedure.
Step-by-Step Instructions
1.
Make sure the phone is oriented so that the battery
area is toward you and the system connector is at the
bottom.
2.
Locate the two catches on the RF port plug and
orient the plug so that the large catch is at 5 o’clock
and the small catch is at 12 o’clock.
3.
Then insert the RF port plug into its hole.
