Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
75(113)
4.26
Label
4.26.1
Label Removal
•
Perform sections 2.1.1 – 2.1.2 of the Base Disassembly Procedure
Tools needed to perform the following steps:
*
Pry tool
*
Style 2A ESD-safe tweezers
•
Lint-free wipes
NOTE! A “ * ” beside a tool listed above indicates that the tool is not specifically called out in the
following instructions, but an operator may find it helpful to use that tool when performing some
steps of the following procedure.
NOTE!
The phrase “pry tool” indicates that a nylon pointer, an orangewood stick, or a front opening tool
may be used during this procedure depending on the user’s preference.
Step-by-Step Instructions
NOTE! This product contains two labels, an
information label and a logo label. Both
labels are printed at the same time on one
label and then that label is separated into
two parts.
1.
Before removing a label from a phone, print a new
label.
NOTE! The text on the new label must be fully
readable and all barcodes must be
scannable.
NOTE!
The label being replaced only has to be
removed if there are already two or more of
that label on the phone.
NOTE!
Both the information label and the logo label
do not have to be replaced just because one
of the labels requires replacement.
2.
Carefully peel the old labels that are being replaced
from the bottom of the battery cavity.
NOTE!
Avoid damaging the battery cavity.
NOTE! Make sure that all adhesive residue is
removed. Carefully clean off any residue in
the label area with alcohol and a lint-free
wipe.
