Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/597 B
©
Sony Ericsson Mobile Communications AB
55(113)
4.17.2
Antenna Cover Installation
If this part is being replaced, a new part should be used in the place of the old part when the
following steps are being performed.
Tools needed to perform the following steps:
*
Style 2A ESD tweezers
NOTE! A “ * ” beside a tool listed above indicates that the tool is not specifically called out in the
following instructions, but an operator may find it helpful to use that tool when performing some
steps of the following procedure.
Step-by-Step Instructions
1.
Hold the flip portion of the phone so that the large
display is facing downward and rotate the hinge arm
so that it forms a 90 degree angle to the flip.
2.
If a new antenna cover is being installed, mount a
flex film cushion on the antenna cover so that the
corner of the cushion is aligned with the corner
feature on the antenna cover in the location shown.
3.
Orient the antenna cover so that the contour of its
curved extension correlates to the curve of the hinge
wrapping portion of the inner flip cover.
