Smartgen HPM6, Руководство пользователя

Страница: 113 / 146

HPM6 Power Management Controller User Manual Page 113 of 146
Table 36 – Output Ports Function
No. Name Description Remark
0. Not Used This port is invalid.
1. Speed Raise Active when the generator is raising speed.
2. Speed Drop Active when the generator is dropping speed.
3. Volt Raise Active when the generator is raising voltage.
4. Volt Drop Active when the generator is dropping voltage.
5. Close Gen
Active when the close generator requirements
are reached.
6. Open Gen
Active when the open generator requirements
are reached.
7. Crank Output Active when unit starts.
8. Stop Output Active when stopping.
9. Remote Control
System can control its status via
communication.
10. Generator OK
Active when the rated voltage and rated
frequency are reached.
11. Common Alarm Active when genset alarm occurs.
12. Common Indication Alarm Active when genset indication alarm occurs.
13. Common Warning Alarm Active when genset warning alarm occurs.
14. Common Block Alarm Active when genset block alarm occurs.
15.
Common Safety Trip
Alarm
Active when genset safety trip alarm occurs.
16.
Common Safety Trip and
Stop Alarm Active when genset safety trip and stop alarm
occurs.
17. Common Trip Alarm Active when genset trips alarm occurs.
18.
Common Trip and Stop
Alarm
Active when genset trip and stop alarm occurs.
19. Input 1 Active Active when input port 1 is active.
20. Input 2 Active Active when input port 2 is active.
21. Input 3 Active Active when input port 3 is active.
22. Input 4 Active Active when input port 4 is active.
23. Input 5 Active Active when input port 5 is active.
24. Input 6 Active Active when input port 6 is active.
25. Input 7 Active Active when input port 7 is active.
26. Input 8 Active Active when input port 8 is active.
27. Input 9 Active Active when input port 9 is active.
28. Input 10 Active Active when input port 10 is active.
29. Input 11 Active Active when input port 11 is active.
30. Input 12 Active Active when input port 12 is active.
31. Input 13 Active Active when input port 13 is active.
32. Input 14 Active Active when input port 14 is active.