Sima DUPLO Series, Оригинальное руководство пользователя

Страница: 29 / 148

ENGLISH
-11-
Grease at the end of the day greasing plate drag of the blades, use a pump grease for this.
Weekly clean water pump clean water flow deposit
To complete the maintenance and care of the gasoline engine, we recommend reading the manual on it has developed
its manufacturer, which is paired with the manual.
It is prohibited to independently make any change in some parts, components or characteristics of
the machine. SIMA, S. A. shall in no case be responsible for the consequences that may derive from a
breach of these recommendations.
11.1 REPLACING THE BELT
The transmission belts are terms that wears out and deteriorates with the normal use of the machine and it
must be replaced periodically. So we will withdraw the pulleys protection loosening its screws and make those
changes. This operation is not difficult because the engine is stopped and the belt tension is loosening.
12. SOLUTIONS TO MOST FREQUENT ANOMALIES
ANOMALY CAUSE SOLUTION
Low oil level alert is on.
Add oil
Fuel clock closed Open fuel clock
Motor switch in OFF position Turn to ON position
Petrol engine does not start.
Safety handle open Press and nail
Loss of electrical supply
Check the general electrical outlet.
Revise the correct position of the
differential and thermal. Verify perfect
state of extension cable and correct fit
on both extremities.
Electrical motor does not start
Damaged switch Replace
Petrol cable interlocked or loose Revise lever and cable accelerator
Gasoline engine does not accelerate
Engine problems Revise by technician
Interlocked or damaged clutch. Revise and replace if necessary
Damaged belt Replace Blades do not turn with the motor
Reducer interlocked or damaged Replace damaged elements.
Dry concrete rests in the central plate. Clean
Blades irregular worn Change
Loose central plate Tighten sufficiently
Machine bumps on the working
surface
Bended arms Replace.