Siemens SITRANS F Coriolis FCT030 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 198

Siemens SITRANS F Coriolis FCT030 Скачать руководство пользователя страница 22

1. Check that you have the most recent EDD, and if necessary update it, see Updating the

Electronic Device Description (EDD) in Initial Setup (Page 17).

2. Launch SIMATIC Manager.
3. Right-click on SITRANS FC and select Open Object to open SIMATIC PDM.
4. Click on Device and select Upload to PG/PC Wizard... to configure the device.

3.8

Wizard - Quick Start via PDM

The graphic Quick Start Wizard provides an easy 5-step procedure that configures the device

for a simple application.
Please consult the SIMATIC PDM operating instructions or online help for details on using

SIMATIC PDM.

Access level control

The parameters are protected against changes by access level control. To gain access, select

Access Management from the device menu, select User and enter the PIN code.
The default user PIN code is 2457.

Quick start

Note
- The Quick Start wizard settings are inter-related and changes apply only after you click on

Apply and Transfer at the end of step 5 to save settings offline and transfer them to the device.
- Do not use the Quick Start Wizard to modify individual parameters.
- Click on Back to return and revise settings or Cancel to exit the Quick Start.

Launch SIMATIC PDM, open the menu Device → Wizard - Quick Start..., and follow steps 1

to 5.

Commissioning
3.8 Wizard - Quick Start via PDM

FCT030 Modbus (From firmware 4.0)

22

Function Manual, 06/2018, A5E39931813-AB

«
...
20
21
22
23
24
...
»

Содержание SITRANS F Coriolis FCT030







































































































































































































Отзывы:

Нет отзывов