Siemens SINAMICS Series Скачать руководство пользователя страница 38

Страница: 38 / 758

Description

SINAMICS DCM DC Converter

Operating Instructions, 12/2018, A5E34763375A

Versions

The armature supply is available in the following versions:

●

2-quadrant units:

The armature is supplied via a fully-controlled three-phase bridge (B6C).

●

4-quadrant units:

The armature is supplied via two fully-controlled three-phase bridges connected in a

circulating-current-free inverse-parallel configuration ((B6)A(B6)C).

The field supply is available in the following versions:

●

1-phase, single-pair controllable two-pulse bridge circuit (B2HZ)

●

1-phase, fully-controlled two-pulse bridge circuit (B2C) (option)

The electronics (CUD) are available in the following versions:

●

Standard CUD

●

Advanced CUD (option)

This CUD can be expanded to include a PROFINET module (CBE20) and features

2 DRIVE-CLiQ connections for connecting additional components from the SINAMICS

drive system, as well as a connector for expansion purposes (to include a second CUD).

●

Additional (second) CUD (Standard CUD or Advanced CUD) (option)

This additional CUD can be fitted to the right of the first CUD and is used for system-

specific extension of the SINAMICS DC MASTER functions.

Additional components

●

Advanced Operator Panel AOP30

The optional Advanced Operator Panel AOP30 is installed outside of the unit – in the

control cabinet door, for example – rather than inside it.

The AOP30 ensures the following additional comfort:
–

Commissioning is supported by a wizard.

–

Measured values are represented by a graphical operation screen.

–

Displays a user-friendly parameter list, including text.

–

There are several editors for user-friendly setting and changing of parameters.

–

As well as help texts on individual faults and alarms, the fault and alarm messages

which occur are listed.

–

Control of the drive (ON/OFF, setpoint specification, jog, direction of rotation reversal)

is enabled "on-site".

–

Three LEDs display the drive status.

●

Additional module CBE20

The additional module CBE20 is inserted in the optional module slot of an Advanced

CUD. It enables the SINAMICS DC MASTER to access the PROFINET network as a

slave as well as to establish SINAMICS Link connections.

Содержание SINAMICS Series























































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SINAMICS Series

Отзывы:

Похожие инструкции для SINAMICS Series

Бренды по названию

Популярные бренды

Siemens SINAMICS Series, Руководство по эксплуатации

Результаты поиска

Содержание SINAMICS Series

Отзывы:

Похожие инструкции для SINAMICS Series

Бренды по названию

Популярные бренды