Siemens SINAMICS Series, Руководство по эксплуатации

Страница: 492 / 758

Descriptions of functions
10.5 Communication via PROFINET IO
SINAMICS DCM DC Converter
490
Operating Instructions, 12/2018, A5E34763375A
9. In the "Device name" field, enter the name that you have selected.
Note
ST (Structured Text) conventions must be satisfied for the name assignment of IO
devices in PROFINET (SINAMICS components). The names must be unique within
PROFINET. Rules for assigning names:
•
Other than "-" and ".", no special characters (such as accented characters, spaces,
brackets) are permitted in the name of an IO device.
• The device name must not begin or end with the "-" character.
•
The device name must not begin with a number.
• Maximum total length of 240 characters (lowercase characters, numbers, hyphen, or
period)
•
A name component within the device name, e.g. a string between two periods, must
not exceed 63 characters.
• The device name must not take the form n.n.n.n (n = 0...999).
•
The device name must not begin with the character sequence "port-xyz" or "port-xyz-
abcde" (a, b, c, d, e, x, y, z = 0...9).
In the "Device name" field, enter the name that you have selected.
10.Click the "Assign name" button.
– The data transfer is confirmed.
11.Click the "Update" button.
– The bus node is detected as drive unit and is consecutively numbered.
– The address, device name and the type are specified.
12.Close the "Edit Ethernet node" window.
13.Activate the option button in front of the detected drive unit and click the "Accept" button.
The SINAMICS drive with CBE20 is transferred as a drive object into the project tree. You
can now continue to configure the drive object.
14.Click the "Connect to target system" button and then call the menu "Target system >
Load > To target device", to load the project to the Control Unit memory card.
The IP address and device name are stored non-volatile on the memory card of the
Control Unit.