Commissioning
8.5 Commissioning with the STARTER commissioning tool
SINAMICS DCM DC Converter
294
Operating Instructions, 12/2018, A5E34763375A
Figure 8-11 Setting the interface – Properties
Note
PG/PC is the only master on bus must be activated if no other masters (PC, S7, etc.) are
available on the bus.
Note
Even if no PROFIBUS interface is installed in the PC, projects can be generated and
PROFIBUS addresses for the drive objects can be assigned.
Only the bus addresses available in the project will be offered. That prevents double bus
address assignments.
When required, a manual address entry can also be used to enter an already assigned
address.
⇒
After completion, click OK to confirm the setup and to return to the project wizard.
Содержание SINAMICS Series
Страница 1: ......
Страница 2: ......
Страница 744: ...Appendix A A 4 Servicing SINAMICS DCM DC Converter 742 Operating Instructions 12 2018 A5E34763375A ...
Страница 758: ......