Siemens SIMOCODE pro, Руководство по эксплуатации функций

Страница: 333 / 344

Tables, data records
3.6 EtherNet/IP data tables
SIMOCODE pro - Communication
Function Manual, 11/2018, A5E40508495002A/RS-AC/003
333
3.6.9 Motor Parameter object
Selected device parameters of the SIMOCODE pro V EtherNet/IP device can be read or
written via the Motor Parameter object. This allows the device parameters to be adjusted via
the controller or a connected control system.
● Class code: 0x0099
● Class attributes: 0
● Number of instances: 1
● Object length: 116 bytes
Table 3- 99 General services for the Motor Parameter object
Service code Available service Service designation Description
Class Instance
0x0E No Yes Get_Attribute_Single Supplies contents of one attribute
0x10 No Yes Set_Attribute_Single Changes an attribute value
Table 3- 100 Attributes of instance 1 for the Motor Parameter object
Attribute ID Access Designation Data
type
Range of values Unit
1 Get/ Set Motor protection - set current Is1 LINT
1)
10 mA
2 Get/ Set Motor protection - set current Is2 LINT
1)
10 mA
3 Get/ Set Motor protection - class SINT 5, 7, 10, 15, 20, 25,
30, 35, 40
4 Get Reserved SINT
5 Get Reserved INT
6 Get/ Set Trip level I> INT 0 .. 255 4% / I_s
7 Get/ Set Warning level I> INT 0 .. 255 4% / I_s
8 Get/ Set Trip level I< INT 0 .. 255 4% / I_s
9 Get/ Set Warning level I< INT 0 .. 255 4% / I_s
10 Get/ Set Stalled rotor level INT 0 .. 255 4% / I_s
11 Get/ Set Trip level U< INT 0 .. 255 8 V
12 Get/ Set Warning level U< INT 0 .. 255 8 V
13 Get/ Set Trip level cos phi< SINT 0 .. 100 1 %
14 Get/ Set Warning level cos phi< SINT 0 .. 100 1 %
15 Get/ Set Trip level P> DINT 0..0xFFFFFFFF 1 W
16 Get/ Set Warning level P> DINT 0..0xFFFFFFFF 1 W
17 Get/ Set Trip level P< DINT 0..0xFFFFFFFF 1 W
18 Get/ Set Warning level P< DINT 0..0xFFFFFFFF 1 W
19 Get/ Set EM+ - trip level DINT 30 .. 40000 1 mA
20 Get/ Set EM+ - warning level DINT 30 .. 40000 1 mA
21 Get/ Set TM1 - trip level T> DINT 0 .. 65535 1 K