Siemens Simatic ET 200pro FC, Руководство по эксплуатации

Страница: 55 / 196

Installation
4.8 Wiring in the ET 200pro system
ET 200pro FC
Operating Instructions, 07/2016, A5E01100763B AC
55
Required tools
If you use prefabricated standard cables, no tools will be needed on the frequency converter
side. You can adapt the motor side to address your needs. The following tools will be
required if you want to assemble the cables yourself.
Table 4- 4 Tools
Harting, Order No.
Crimping tool (Q8/0 and Q4/2) -- 0999 000 0001
Inserts for crimping tool 0.5 mm
2
(AWG 20) 0999 000 0007
1.5 mm
2
(AWG 16) 0999 000 0007
4 mm
2
(AWG 12) 0999 000 0006
6 mm
2
(AWG 10) without insert
Extraction tool (Q8/0) -- 0999 000 0319
Extraction tool (Q4/2) -- 0999 000 0305
Table 4- 5 Power supply connector X1, X3
All plug connector parts are Harting Q4/2
Housing
Crimp size Crimp number Cap Screw connec-
tion/seal
0912 006 3141 Female for X1:
6 mm
2
(AWG 10)
0932 000 6208 0912 008 5408 0900 000 5059
Male for X3:
4 mm
2
(AWG 12)
0932 000 6107 0912 008 5407 0900 000 5059
Table 4- 6 Motor plug connector X2
All plug connector parts are Harting Q8/0
Housing
Crimp size Crimp number Cap Screw connec-
tion/seal
0912 008 3001 Male:
1.5 mm
2
(AWG 16)
0933 000 6104 0912 008 0502 0912 000 5057
Male:
0.5 mm
2
(AWG 20)
0933 000 6121