Siemens Simatic ET 200pro FC, Руководство по эксплуатации

Страница: 115 / 196

Commissioning and optimization (software)
7.4 Commissioning of communication between the S7 CPU and the frequency converter
ET 200pro FC
Operating Instructions, 07/2016, A5E01100763B AC
115
Error
value
Meaning Remark Additional
inf.
0x06 Invalid "Set" action (only reset is
allowed)
Attempt to modify with a value unequal
0 in a situation where this is not al-
lowed.
Subindex
0x07 The descriptive element cannot be
modified.
Attempt to modify a read-only descrip-
tive element.
Subindex
0x09 No descriptive data Access to a non-existent description
(parameter value exists).
–
0x0B No priority active Attempted modification without active
priority.
–
0x0F No text field available Attempt to access a non-existent text
field (parameter value exists).
–
0x11 Request cannot be executed on
account of the operating state
Access is temporarily disabled for
unspecified reasons.
–
0x14 Invalid value Attempt to modify with a value which
lies within the limits, however, is inva-
lid for other permanently valid reasons
(parameters with permanently defined
values).
Subindex
0x15 Response too long The length of the present response
exceeds the maximum transfer length.
–
0x16 Invalid parameter address Invalid or unsupported value for attrib-
ute, number of elements, parameter
number, subindex, or a combination of
these.
–
0x17 Invalid format Write request for an invalid or unsup-
ported parameter data format.
–
0x18 Inconsistent qty. of values Write request - The number of values
in parameter data and the number of
elements in the parameter address do
not match.
–
0x19 Drive object is not present Access to a drive object which is not
present.
–
0x20 The parameter text element cannot
be modified.
Attempt to modify a read only parame-
ter text element.
Subindex