MX-C250 ADJUSTMENTS 5 – 38
9-D
Color copy density adjustment (for each
color copy mode) (separately for the low-
density area and the high-density area)
(No need to adjust normally)
The density is adjusted in each copy mode individually.
This adjustment must be performed in the following cases:
* When there is necessity to change the copy density of the low
density and high density part at each copy density individually.
* When there is necessity to change the density gradient of the
copy by each the copy mode individually.
* When there is necessity to change all copy density by each the
copy mode individually.
* When there is request from the user.
1)
Enter the SIM 46-1 mode.
2)
Select the copy mode to be adjusted with [UP] or [DOWN]
keys.
3)
Enter the adjustment value with 10-key and press [OK] key.
When adjusting the copy density on the low density part, select
"LOW" mode and change the adjustment value. When adjust-
ing the copy density on the high density part, select "HIGH"
mode and change the adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy
density is decreased.
4)
Make a copy and check the adjustment result.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
9-E
Monochrome copy density adjustment
(for each monochrome copy mode)
(separately for the low-density area and the
high-density area)
(No need to adjust normally)
The density is adjusted in each copy mode individually.
This adjustment must be performed in the following cases:
* When there is necessity to change the copy density of the low
density and high density part at each copy density individually.
* When there is necessity to change the density gradient of the
copy by each the copy mode individually.
* When there is necessity to change all copy density by each the
copy mode individually.
* When there is request from the user.
1)
Enter the SIM 46-2 mode.
2)
Select the copy mode to be adjusted with [UP] or [DOWN]
keys.
3)
Enter the adjustment value with 10-key and press [OK] key.
When adjusting the copy density on the low density part, select
"LOW" mode and change the adjustment value. When adjust-
ing the copy density on the high density part, select "HIGH"
mode and change the adjustment value.
When the adjustment value is increased, the copy density is
increased. When the adjustment value is decreased, the copy
density is decreased.
4)
Make a copy and check the adjustment result.
Switch the adjustment simulation mode and the normal copy
mode alternately, and adjust and check the adjustment result.
Repeat switching the adjustment simulation mode and the nor-
mal copy mode and changing the adjustment value and check-
ing the copy until a satisfactory result is obtained.
9-F
Automatic monochrome (Copy) mode
document density scanning operation
(exposure operation) conditions setting
(Normally no need to set)
Use for setting the condition of read operation (Exposure) for docu-
ment density in monochrome auto copy mode.
When a copy with correct density is not obtained by type of docu-
ment, change the setting.
This setting is required in the following cases.
* When a proper density copy is not obtained in the monochrome
automatic copy mode.
* When a document with images near its lead edge is copied.
* When a document with colored background is copied.
1)
Enter the SIM 46-19 mode.
Display/Item
Setting range
Default
1
LOW
Text
1 - 99
50
2
LOW
Text/Printed Photo
1 - 99
50
3
LOW
Photograph
1 - 99
50
4
HIGH
Text
1 - 99
50
5
HIGH
Text/Printed Photo
1 - 99
50
6
HIGH
Photograph
1 - 99
50
Sim46-1 EXP. ADJ (CL COPY)
1: LOW
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌
_
0
_
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌
00
2: HIGH
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌
0
0
Display/Item
Setting range
Default
1
LOW
Text
1 - 99
50
2
LOW
Text/Printed Photo
1 - 99
50
3
LOW
Photograph
1 - 99
50
4
HIGH
Text
1 - 99
50
5
HIGH
Text/Printed Photo
1 - 99
50
6
HIGH
Photograph
1 - 99
50
Sim46-2 EXP. ADJ (BW COPY)
1: LOW
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌
00
2: HIGH
Sim46-19 EXP. ADJ (B/W AE)
1: AE MODE
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌
_
0
_
2: DESTINATION MODE
㻌 㻌 㻌 㻌 㻌 㻌 㻌
1
[
0-
1]
㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌 㻌
0
