MX-C250 MAINTENANCE 9 – 3
E. Developer cartridge
For CMYK only the life end cartridge code is displayed.
- When the black drum cartridge does not reach the life end and only the color drum cartridge reaches the life end, black/white print can be
performed but color print cannot be performed.
- When the developer cartridge is replaced with a new one, execute SIM24-5 to clear the print counter, the accumulated traveling distance
counter and the usage day.
- If the above guidance does not disappear when the developer cartridge is replaced, the initial setting of the toner density must be executed
with the simulation, and the auto color calibration must be executed.
- When the initial setting of the toner density is executed, the counters are cleared and the above display disappears.
F. Toner cartridge
For KCMY only the life end cartridge code is displayed.
- Detected by the toner motor rotation number and the pixel count (The value of larger life percentage is employed.)
Since the life of the toner cartridge which is packed when shipping from the factory is 1.0K, the remaining quantity of the toner cartridge,
though it is a new one, is displayed as 25-50%.
- Selection of Display/Not Display can be made with Sim26-69. (Default: Not Display)
- When the black toner cartridge does not reach the life end and only the color toner cartridge reaches the life end, black/white print can be
performed but color print cannot be performed.
G. Toner collection container
When the Toner collection container is replaced, the display disappears.
H. Other (Ozone Filter)
Display content
Display condition
Print job
Enable/Disable
Sim26-38-E
set value
Counter name
Counter value
(Maintenance required.
Code:VK)
0 (Print continue)
Developer cartridge print counter (K)
Developer cartridge accumulated rotation number (K)
When 100K(Other countries
than China) or 75K(China) is
reached.
When 575K rotations is
reached.
Enable
1 (Print stop)
(Maintenance required.
Code:V(C/M/Y))
0 (Print continue)
Developer cartridge print counter (C/M/Y)
Developer cartridge accumulated rotation number (C/
M/Y)
When 60K(Other countries than
China) or 45K(China) is
reached.
When 575K rotations is
reached.
Enable
1 (Print stop)
Display content
Display condition
Print JOB Enable/Disable
SIM26-38-A
Set value
Counter name
Counter value
(K/C/M/Y) Prepare a toner
Near near end)
No relation
Toner motor rotation time
Specified time of
rotations
Enable
(K/C/M/Y) Toner supply is low
Near end)
No relation
Toner supply amount is
decreasing.
ATC sensor output
variation
Enable
Replace the toner cartridge. (K)
(End)
0 (Print continue)
The pixel count from near end
reaches the specified value.
Specified pixel count
(Disable for a JOB which
requires K toner)
1 (Print stop)
Replace the toner cartridge. (C/M/
Y) (End)
0 (Print continue)
The pixel count from near end
reaches the specified value.
Specified pixel count
Enable for monochrome,
Disable for color
1 (Print stop)
Display content
Display condition
Print JOB Enable/Disable
SIM26-38-A
Set value
Counter name
Counter value
Maintenance required. Call for
service. TK
0 (Print continue)
When the waste toner full detection switch is ON for
1000ms.
Enable
1 (Print stop)
Replace Toner collection
container.
0 (Print continue)
When 10450 count is reached from the near end detec-
tion.
Disable
1 (Print stop)
Display content
Display condition
Print JOB Enable/Disable
SIM26-38-A
Set value
Counter name
Counter value
No
No relation
Ozone filter counter
When 75K rotations is
reached.
Enable
