System Manual V2 – MOVITRAC® B
7
2
General information
Safety Notes
2
Safety Notes
The following basic safety notes are intended to prevent injury to persons and damage
to property. The operator must ensure that the basic safety notes are read and
observed. Make sure that persons responsible for the system and its operation, as well
as persons who work independently on the unit, have read through the operating instruc-
tions carefully and understood them. If you are unclear about any of the information in
this documentation, or if you require further information, please contact SEW-
EURODRIVE.
2.1
General information
Never install or start up damaged products. Submit a complaint to the shipping company
immediately in the event of damage.
During operation, drives with this type of enclosure may have live, uninsinuated, and
sometimes moving or rotating parts as well as hot surfaces.
Removing covers without authorization, improper use as well as incorrect installation or
operation may result in severe injuries to persons or damage to property.
Refer to the documentation for additional information.
2.2
Target group
Only a qualified electrician
is authorized to transport, install, startup or service the
units (observe IEC 60364 or CENELEC HD 384 or DIN VDE 0100 and IEC 60664 or
DIN VDE 0110 as well as national accident prevention guidelines).
Qualified electricians in the context of these basic safety notes are persons familiar with
installation, assembly, startup and operation of the product who possess the required
qualifications.
Any activities regarding transportation, storage, operation, and disposal must be carried
out by persons who have been instructed appropriately.
2.3
Designated use
Frequency inverters are components intended for installation in electrical systems or
machines.
In case of installation in machines, startup of the drive inverters (meaning the start of
proper use) is prohibited until it is determined that the machine meets the requirements
stipulated in the EC Directive 98/37/EC (machine directive); observe EN 60204.
Startup (i.e. the start of designated use) is only permitted under observance of the EMC
(2004/108/EC) directive.
Содержание MOVITRAC MC07B0037-2A3-4-00
Страница 250: ......