![SEW MOVIAXIS MX Скачать руководство пользователя страница 157](http://html1.mh-extra.com/html/sew/moviaxis-mx/moviaxis-mx_operating-instructions-manual_1250008157.webp)
Operating Instructions – MOVIAXIS® MX Multi-Axis Servo Inverter
157
6
General information
Operation
6
Operation
6.1
General information
HAZARD
Dangerous voltages at cables and motor terminals
Severe or fatal injuries from electric shock.
• When the unit switch is in the ON position, dangerous voltages are present at the
output terminals as well as any connected cables and motor terminals. This also ap-
plies even when the unit is inhibited and the motor is at standstill.
• The fact that the operation LED is no longer illuminated does not indicate that the
MOVIAXIS
®
MX multi-axis servo drive is no longer connected to the mains and is
de-energized.
• Before you touch the power terminals, check to see that the MOVIAXIS
®
MX multi-
axis servo drive has been disconnected from the mains.
• Observe the general safety notes in section 2 and the notes in sec. "Electrical In-
stallation" on page 74.
HAZARD
Risk of crushing if the motor starts up unintentionally.
Severe or fatal injuries.
Mechanical blocking or internal safety functions of the unit can cause a motor standstill.
Removing the cause of the problem or performing a reset can result in the drive re-
starting on its own.
• Ensure that the motor cannot start inadvertently, for example, by removing the elec-
tronics terminal block X10.
• Additional safety precautions must be taken depending on the application to avoid
injury to people and damage to machinery.
STOP
The motor output of the multi-axis servo inverter may only be switched or disconnected
when the
output stage is inhibited
.
Содержание MOVIAXIS MX
Страница 2: ...SEW EURODRIVE Driving the world...
Страница 210: ......
Страница 211: ...SEW EURODRIVE Driving the world...