Sanding STS-750, Руководство пользователя

Страница: 65 / 214

⑤ The screen returns to
Setting Meas menu. Settings
that are made will diplay “*”
in the front,
[*]F1 Setting Job (1)
[*] F2 Setting Station (2)
[*] F3 Set Orientation (3)
F4 Start (4)
【 Setting Meas 】
5.3.2 With Coordinates
A target with known coodinates can also be used to determine the orientation. The number of
known points can be one or more. This series of instrument provides a method of backsitght point
orientaion with a maximum of 5 known points.
In the picture, 1: Backsight Point 1 2: Back Sight Point 2 3. Backsight Point 3
Procedure
：
1.Press [F2] to activate orentation with coodinates function.
2.Input the orientation PtID and determine the point found.
3.Input and confirm the reflector height. A maximum of 5 target points with
known coordinates can be used.
Orientation coordinates can be either obtained from the internal memory or entered
manually.
OPERATIONAL STEPS OPERATION DISPLAY
① Press [F2] to set select the
method to set orientation. [F2]
【
Orientation
】
F1 Set manually
F2 Known Point
65