Sanding STS-750, Руководство пользователя

Страница: 36 / 214

② Input the code, and press [F4]( ↓ )
to display the second page soft key,
here, the single coding being input
will not be enlisted in coding
storeroom.
A ： Press [F1](All) to start
measurement, save all datum of the
coding and measurement into job ※
1)
B ： Press [F2](Code) to search the
codings already inputted.
Input the code
+
[F4]
A
：
Press[AII]
B
：
Press [Code]
【 Measure 】 3/4
Pt ID
：
A1
Code ： SANDING
RHT ： 1.500 m
HZ ： 63°40 ′ 50 ″
V
：
94°33 ′ 51 ″
Ⅰ
：
---.--- m
AII DIST RECORD ↓
AII CODE ED
M ↓
【 Measure 】 3/4
Pt ID ： A1
Code
：
SANDING
RHT ： 1.500 m
HZ
：
63°40 ′ 50 ″
V ： 94°33 ′ 51 ″ Ⅰ
： ---.--- m
AII CODE ED M ↓
【 Code Search 】 1/2 ▼
Select / Input new code
！
Search ： SANDING
Code
：
--- ---
Desc ： --- ---
Info1
：
--- ---
Info2 ： --- ---
RECORD ADD OK
※
1)The save sequence of the data of coding and measurement is set in ‘Settings’ or ‘Main settings’
The settings of coding record are : save before , save after. Here explain separately as follows ：
save before
：
to save coding data before practical survey data
save after ： to save the coding data closely after practical survey data
Please inquire in “measurements’ document
After starting [Coding] function, the coding screen shows as follows:
【 Code Search 】 1/2 ▼
Select / Input new code
！
Search ：
Code ： --- ---
Desc
：
--- ---
Info1 ： --- ---
Info2
：
--- ---
RECORD ADD OK
GSI- Each attributes of GSI code are narrated below
：
CODE ： Code name 。
DESC ： Appended note
Info1 ： Editable information including more content
……
Info8
： The other information column
After coding search function is started, if the code name is already in the coding storeroom ,
it can be edited.Here the edited data can not be kept in the coding storeroom any more. You may
press [RECORD] to keep it in survey data document as a single coding value, or press [All]
36