⑥
When “Oset After REC” is
selected:
If [All] is started, the
e offset
correction.
is started, you must
When the “Permanent” is
t
i
data beforehand.
Restart measurement, displaying the data of
easurement point
：
program will display the data
(the target point) which is
calculated by plusing the
measured result and th
If [DIST]
restart measurement after
pressing [RECORD] to display
the actual value of the
measurement point.
selected, the program will
always diplay the data plused
D splays the Rec.
m
【
Measure
】
PtID: A2
R.HT
：
1.500 m
HZ
：
0°00
′
00
″
V
：
90°10
′
50
″
：
5.568 m
Ⅰ
：
3.689 m
All DIST RECORD
↓
【
Measure
】
PtID
：
A2
R.HT
：
1.500 m
HZ
：
0°00
′
00
″
V
：
90°10
′
50
″
：
2.568 m
Ⅰ
：
1.689 m
All DIST RECORD
↓
he offset correction.
⑦
If ther
t of
target offs
at
the procedure
t the
Target Offset function.
【
Ta
Inpu
EC
rget Offset
】
t Offset!
T_Offset : 0.000m
L_Offset : 0.000m
H_Offset : 0.000m
e is no more poin
et
repe
to measure,
①
to restar
MODE
：
Set After R
0SET OK
※
1)If the coodinate of target point is needed to calculate, please set the coodinate of station,
heights of instrument and reflector, backsight point, etc.
The period of applicability can be set as follows:
MODE EXPLANATION
0set After REC
The offset values are set to 0 after the point is saved.
Permanent
The offset values are applied to all further measurements.
The offset values are always reset to 0 when the application is quit.
4.3 DELET LAST RECORD
st recorded data
surement block
o
ast record is
irreversible
!
Only records recorded in “Surveying” or “Measuring” can be deleted.
This function deletes the l
r a code block.
Delete the l
a
block, which can be either a mea
44
Содержание STS-750
Страница 6: ...6...
