Sanding STS-750, Руководство пользователя

Страница: 13 / 214

dismounted from tribrach. Loosen the tribrach locking screw in the locking knob with a
screwdriver. Turn the locking knob about 180° counter-clockwise to disengage anchor jaws, and
take off the instrument from tribrach..
·
Mounting
Insert three anchor jaws into holes in tribrach and line up the directing stub with the directing
crew with a screwdriver.
OBJECT
）
o make the reticle clear .
② Collimate the target point with top of the triangle mark in the coarse collimator. (Keep a
☆
there is parallax when your eye moves up , down or left , right , it means the diopter of eyepiece lens or
ccuracy will be influenced, so you should adjust the eyepiece tube carefully
erefore can input fig and
haracter directly. And since STS-720 is not equiped with numeric keypad, it needs to press [ENT]
navigation key
slot. Turn the locking knob about 180°clockwise and tighten the locking s
2.6 EYEPIECE ADJUSTMENT AND COLLIMATING
·
Method of Collimating Object
（
for reference
① Sight the Telescope to bright place and rotate the eyepiece tube t
certain distance between eye and the coarse collimator).
③ Make the target image clear with the telescope focusing screw.
If
focus is not well adjusted and a
to elimate the parallax.
2.7 INPUTTING MODE
STS-750 series Total Station has character numeric keypad, users th
c
) to open inputting mode. These two kinds of total station on keypad (or
instrument will be introduced separately and particularly as follows.
·
STS-750
：
13