Sanding STS-750, Руководство пользователя

Страница: 139 / 214

④ Press [F4] to store this
lignment and return to
end point and azimuth of this
point.
· Now
ed according
ents. If user
to change this azimuth angle,
Chain ： 131.000 m
a
alignment main menu, and
displays chainage of the line,
, user can define other
curves.
· When the line is in the middle
of road, the azimuth angle of
the line is calculat
to the previous elem
【 HZ Alignment Type 】
AZ
：
25°00 ′ 00 ″
LINE ARC SPIRAL POINT
is
the new azimth angle can be
input manually.
Curve
Press [ARC] in “Hz Align A curve consists of arc length
and radius. The rule of radiu f the curve. When the curve
turns right, the radius value is the radius value is minus. The
arc l gth can not be negative.
OPERATIONAL STEPS LAY
ment pe” menu to define the curve ty .
s value: along the forward direction o
positive, while the curve turns to left,
en
OPERATION DISP
① Press [F2] ([ARC]) to enter
into Define Arc Screen
fun
[F2]
Chain.
：
100.000 m
AZ ： 0°00 ′ 00 ″
ction.
【
HZ Alignment Type
】
LINE ARC SPIRAL PT
② I
then press [ENT
data.
Input radius 【
Define HZ AL
】
2/1
Type ： ARC
nput radius and arc length,
] to record this
and arc
length
+
[ENT]
Radius ： ---.--- m
ArcLen ： ---.--- m
PREV NEXT SEARCH
↓
139