RUTHMANN 27409, Инструкция по эксплуатации и техническому обслуживанию

Страница: 188 / 261

9 Maintenance
9-2
RUTHMANN-Steiger
®
TB270
BA.GB.12-27409-05-07-FTA-jr
Ruthmann-Steiger entitled to carry out the work and which
are also able to recognize and to avoid possible dangers.
For maintenance, especially for expert inspections and for
carrying out repair work we recommend contacting our
RUTHMANN-after-sales-service or other personnel author-
ized by us.
Indications concerning maintenance work at chassis are to
be taken from the operating instructions of the chassis man-
ufacturer.
Danger!

Before starting maintenance work the Ruthmann-
Steiger must be taken out of operation and must be
protected against inadvertent and unauthorized in-
stances of it being put into operation.

Attention when handling with hot operating and auxil-
iary material (Danger of burning and scalding). Parts
of the hydraulic system are also under pressure even
with the machine taken out of operation. Each con-
tact with the skin as well as breathing in of steams of
the hydraulic liquids should be avoided. Wear protec-
tion gloves and protection glasses. Greases, hydrau-
lic- and gear oil etc. are detrimental to health. During
handling with greases and oils the corresponding
safety data sheets for each product must be ob-
served.

When working at the electrical system all lines must
be switched voltage-free (e.g. ignition off, disconnect
battery
). The voltage-free condition must be checked
and be secured against unintended switching-on (e.g.
pull out ignition key).

Defective or damaged machines, constructional
components or constructional groups must immedi-
ately be replaced or repaired through the Ruthmann-
after-sales-service or through personnel authorized
by us.

After finishing the maintenance work a function test
of the machine, of the emergency cut-off push button
and of the safety devices must be carried out. . All