RUTHMANN 27409, Инструкция по эксплуатации и техническому обслуживанию

Страница: 144 / 261

6 Operation
6-30
RUTHMANN-Steiger
®
TB270
BA.GB.12-27409-05-07-FTA-jr
6.5.9 Moving the Steiger into the basic position automatically
Danger!
There is a danger of collision with any obstacles there
m
ight be on the way to the Steiger’s basic position!
The operating staff must themselves be sure that no
collision occurs between the working cage, the boom
system or any obstacles when automatic movement to
the Steiger’s basic position is carried out! If there
should be any obstacle on the way the computer control
system takes, then it must be moved around manually
using working cage’s control panel. Afterwards, the
movement can be continued by pressing and holding
down the „Basic position“ push button.
Note
If at the beginning or during the automatic driving into basic
position single movements are blocked due to e.g. the load
moment limitation, the operator must possibly himself move
the boom out of the locking by operating the joystick.
Afterwards, the automatic movement can be continued by
pressing and holding down the „Basic position“ push button.
Component
Movement /
Indication
Execution at operating panel
Boom system and
stabilising jacks move to basic
position
Actuate push button „Basic position“
(keep depressed).
The basic position is moved into automatically as long as the above-mentioned
push button is pressed.
First the boom system is automatically moved to the basic position and then the
stabilising jacks are retracted.