RUTHMANN 27409, Инструкция по эксплуатации и техническому обслуживанию

Страница: 77 / 261

3 Description of the
Ruthmann-Steiger
BA.GB.12-27409-05-07-FTA-jr
RUTHMANN-Steiger
®
TB270
3-15
3.3.14 Memory
„Memory“ facilitates recurring movements to certain target positions (work-
ing cage positions). When a target position is reached it can then be saved.
Such a target position can then be moved to automatically from any other
position. The route previously travelled will not be retraced, however!
The target position saved will be kept (even after the Ruthmann-Steiger is
switched off) until a different position is saved.
3.3.15 Automated positioning aid for centre position of boom
The automated positioning aid makes it possible to bring the boom easily
into its centre position in order to facilitate lowering of the boom into its
boom rest.
As soon as the boom is lowered well below its horizontal position with the
telescope retracted, but is still lifted higher than the boom rest and is
moved from a lateral position towards the centre position, the rotating
movement will be interrupted in the centre position over the boom rest. In
this position the boom can be lowered into its boom rest.
3.3.16 Moving the Steiger into the basic position automatically
Regardless of the position in which the boom is currently in, the Ruthmann
Steiger can be automatically moved to the basic position by push button.
First the boom is moved to the basic position. Then the stabilising jacks are
retracted.