RUTHMANN 27409, Инструкция по эксплуатации и техническому обслуживанию

Страница: 133 / 261

6 Operation
BA.GB.12-27409-05-07-FTA-jr
RUTHMANN-Steiger
®
TB270
6-19
6.5.3.4 Minimum jacking
For a minimum vertical jacking the Ruthmann-Steiger can be positioned al-
ternatively only with the rear stabilizing jacks or with all four stabilizing
jacks. The adjustment (minimum jacking with two or four jacks) is carried
out by means of the control panel of the emergency control. The jacking
variant does not influence the „working range for minimum jacking”. The
working range is identical in both cases.
Danger!
Danger of overturning. The wheels of the vehicle must
not be pressed in a different way into the vehicle
springs due to unevenness of ground (e.g. kerbings,
potholes etc.)! The tire pressure of the vehicle wheels
must correspond to the value indicated at the Ruth-
mann-Steiger. Check the tire pressure before operation
of the stabilizing jacks!
The inclination of the Steiger must at all events be con-
trolled by means of the levelling indicator!
Attention!
Overloading of the front axle! In case of minimum jack-
ing only with the rear stabilizing jacks, the rear jacks
must not be extended too much, otherwise the front axle
will be overstressed and possibly damaged.
Note
The wheels of the vehicle rest completely on ground (brak-
ing effect). This can avoid e.g. a „slump” of the Ruthmann-
Steiger on a slope. Eventually the Ruthmann-Steiger must
be secured against slump (e.g. on plain and slippery ground)
by means of other appropriate measurements.
The automatic positioning device does not work with the
„Minimum jacking”.