RKC INSTRUMENT Z-TIO-G, Инструкция по эксплуатации

Страница: 167 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-59
Event 1 delay timer
RKC communication
identifier
TD
Modbus
register address
ch1: 01B6H (438)
ch2: 01B7H (439)
Event 2 delay timer RKC communication
identifier
TG
Modbus
register address
ch1: 01D2H (466)
ch2: 01D3H (467)
Event 3 delay timer
RKC communication
identifier
TE
Modbus
register address
ch1: 01EEH (494)
ch2: 01EFH (495)
Event 4 delay timer RKC communication
identifier
TF
Modbus
register address
ch1: 020AH (522)
ch2: 020BH (523)
Event delay timer is to set an output delay time for event outputs.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
0 to 18000 seconds
Factory set value:
0
Related parameters:
Comprehensive event state (P. 9-4), Event state monitor (P. 9-8),
Event set value (P. 9-19), Event type (P. 9-52), Event interlock (P. 9-57),
Event differential gap (P. 9-58), Force ON of Event action (P. 9-61)
Function:
When an event condition becomes ON status, the output is suppressed until the
Delay Timer set time elapses. After the time is up, if the event output is still ON
status, the output will be produced.
Example: When the setting of Event 1 delay timer is 50 seconds
Event state

Set value (SV) 
Event 1 set value 
Measured value (PV)
Event 1
delay timer
(50 seconds)
Event 1 output ON 
Event 1 output OFF 
Non-event state 
Event 1
delay timer
(50 seconds)
Continued on the next page.