RKC INSTRUMENT Z-TIO-G, Инструкция по эксплуатации

Страница: 127 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-19
Event 1 set value (EV1)
RKC communication
identifier A1
Modbus
register address ch1: 0076H (118)
ch2: 0077H (119)
Event 2 set value (EV2)
RKC communication
identifier A2
Modbus
register address ch1: 007AH (122)
ch2: 007BH (123)
Event 3 set value (EV3)
RKC communication
identifier A3
Modbus
register address ch1: 007EH (126)
ch2: 007FH (127)
Event 4 set value (EV4)
RKC communication
identifier A4
Modbus
register address ch1: 0082H (130)
ch2: 0083H (131)
EV1 through EV4 are set values of the event action.
Attribute:
R/W
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
Deviation action
1
and Deviation action between channels
1
:

Input span to

Input span
(Varies with the setting of the decimal point position.
However, even if "3: Three decimal places" is set, the
maximum settable decimal places are 2.)
Process action
2
and SV action
2
:
Input scale low to Input scale high
(Varies with the setting of the decimal point position.
However, even if "3: Three decimal places" is set, the
maximum settable decimal places are 2.)
MV action
2
:

5.0 to

105.0 %
1
Deviation high, Deviation low, Deviation high/low, Band
2
high, low
Factory set value:
50.00
Related parameters:
Event type (P. 9-52), Event hold action (P. 9-55),
Event differential gap (P. 9-58), Event delay timer (P. 9-59),
Force ON of Event action (P. 9-61)
When the Event type is “0: None,” this parameter is RO (Read Only).
When “9: Control loop break alarm (LBA)” is selected for the Event 4 type, the Event 4 setting
will be RO.