RKC INSTRUMENT Z-TIO-G, Инструкция по эксплуатации

Страница: 212 / 246

10. TROUBLESHOOTING
10-2
IMS01T28-E4
Solutions for Problems
This section explains possible causes and treatment procedures if any abnormality occurs in the instrument.
For any inquiries, please contact RKC sales office or the agent, to confirm the specifications of the product.
If it is necessary to replace a device, always strictly observe the warnings below.
All wiring must be completed before power is turned on to prevent electric shock, instrument
failure, or incorrect action. The power must be turned off before repairing work for input break and
output failure including replacement of sensor, contactor or SSR, and all wiring must be completed
before power is turned on again.
When replacing the module with a new one, always use the module with the same model
code. If the module is replaced, it is necessary to re-set each data item.
 To prevent electric shock or instrument failure, always turn off the system
power before replacing the instrument.
 To prevent electric shock or instrument failure, always turn off the power
before mounting or removing the instrument.
 To prevent electric shock or instrument failure, do not turn on the power until
all wiring is completed. Make sure that the wiring is correct before applying
power to the instrument.
 To prevent electric shock or instrument failure, do not touch the inside of the
instrument.
 All wiring must be performed by authorized personnel with electrical
experience in this type of work.
WARNING
!
CAUTION