RKC INSTRUMENT Z-TIO-G, Инструкция по эксплуатации, Страница: 227 / 246

11. SPECIFICATIONS
IMS01T28-E4
11-11

Peak current suppression function
This function is effective for modules connected each other by connectors on the base.
The peak current suppression function is performed in coupled modules.
 Master-slave mode
Setting range: Address of interacting modules:

1, 0 to 99
Channel selection of interacting modules: 1 to 99
Selection switch of interacting modules:
0 (No interaction)
1 (Interact with other channels)
Bit 0: Memory area number
Bit 1: Operation mode
Bit 2: Auto/Manual
Bit 3: Remote/Local
Bit 4: Unused
Bit 5: Interlock release
Bit 6: Suspension of area soak time
 Self-diagnostic function
Control stop: Adjustment data error (Error code 1)
Data back-up error (Error code 2)
A/D conversion error (Error code 4)
Logic output data error (Error code 32)
Action stop (Error number is not displayed [Operation: Impossible]):
Power supply voltage monitoring
Watchdog timer
Instrument status: When a self-diagnostic error occurs: All output OFF
Display: A green lamp flashes (Control is stopped due to the self-
diagnosis)
A red lamp is on (Action is stopped due to the self-diagnosis)
 Power
Power supply voltage: 21.6 to 26.4 V DC [Including power supply voltage variation]
(Rating 24 V DC)
Power consumption (at maximum load):
120 mA max. (at 24 V DC)
Rush current: 10 A or less