RKC INSTRUMENT Z-TIO-G, Инструкция по эксплуатации, Страница: 115 / 246

9. COMMUNICATION DATA DESCRIPTION
IMS01T28-E4
9-7
Set value (SV) monitor
RKC communication
identifier MS
Modbus
register address ch1: 0019H (25)
ch2: 001AH (26)
This value is a monitor of the Set value (SV) that is a desired value for control.
Attribute:
RO
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
Setting limiter low to Setting limiter high
(Varies with the setting of the decimal point position.)
Factory set value:

Related parameters:
Input type (P. 9-45), Decimal point position (P. 9-46)
Remote setting (RS) input value monitor
RKC communication
identifier S2
Modbus
register address ch1: 001DH (29)
ch2: 001EH (30)
Input value used in Remote mode. Monitors the SV selected by the remote SV selection function.
Attribute:
RO
Digits:
7 digits
Number of data:
2 (Data of each channel)
Data range:
Setting limiter low to Setting limiter high
(Varies with the setting of the decimal point position. However, even if "3: Three
decimal places" is set, the maximum settable decimal places are 2.)
Factory set value:

Related parameters:
RS bias (P. 9-30), RS ratio (P. 9-31), RS digital filter (P. 9-31),
SV select function (P. 9-83),
Remote SV function master channel module address (P. 9-87),
Remote SV function master channel selection (P. 9-88)