Raymarine c125, Инструкция по установке и эксплуатации

Страница: 93 / 464

Radar scanner status symbols
The radar scanner power mode status is indicated
in the databar.
Symbol
Radar
power
mode
Description
Trans-
mit (TX) Rotating icon, signifying that the
scanner is on and transmitting.
When SCANNER is set to ON,
select this mode to activate the
scanner. This is the usual mode of
operation.
Standby
(STBY) Static icon, indicating that the
scanner is on but not transmitting,
and the antenna is not rotating.
The scanner does not transmit and
the radar data is removed from the
screen. This is a power-save mode
used when the radar is not needed
for short time periods. When
you return to transmit mode, the
magnetron does not need to warm
up again. This is the default mode.
Off Scanner powered off when radar
not required, but display is in use
for other applications, such as the
chart. When selected, the system
counts down. During this time you
cannot re-power the scanner.
Timed
Trans-
mit Scanner switches between
on/transmitting, and standby mode.
Scanner goes into power save
mode when constant use of radar
is not required.
AIS status symbols
AIS status is indicated by a symbol in the databar.
Symbol Description
AIS unit is switched on and operating.
AIS currently unavailable.
AIS unit is switched off, or not
connected.
AIS unit is in Silent Mode.
AIS unit is in Silent Mode, with active
alarms.
Symbol Description
AIS unit is connected and switched
on, but has active alarms.
AIS unit is connected and switched
on, but the dangerous and lost alarm
is disabled.
Sonar status symbols
The sonar status is indicated in the databar.
Symbol Description
Symbol animated: the sonar
module is connected and
transmitting.
Symbol static: the sonar
module is connected but not
transmitting.
Symbol greyed-out: the sonar
module is not connected, or
is not detected.
GPS status symbols
The GPS receiver status is indicated in the databar.
Symbol Description
A GPS receiver is connected
and has obtained a fix.
A GPS receiver is not
connected, or cannot obtain
a fix.
Getting started
93