Raymarine c125, Инструкция по установке и эксплуатации

Страница: 37 / 464

3.4 Identifying your display variant
To discover which model display you have follow the
steps below:
From the homescreen:
1. Select
Set-up .
2. Select Maintenance .
3. Select Diagnostics .
4. Select Select Device .
5. Search the Network column for the 'This Device'
entry.
6. The Device column for this record will list the
model of your display.
3.5 Networking constraints
Raymarine’s 3 rd generation LightHouse powered
MFD s ( a Series , c Series , e Series and gS Series )
can be networked together.
General
• Up to 10 LightHouse powered MFD s can be
connected together using SeaTalk hs .
• MFD s can also be connected via SeaTalk ng® or
NMEA 0183 , but not all functions are supported.
• All networked a a Series , c Series and e Series
displays must contain LightHouse software
release V4.32 or later.
• All networked gS Series displays must contain
LightHouse software release V7.43 or later.
Note: The a6x and a7x variant a Series MFD s
cannot be networked using NMEA 0183 .
Master / repeater operation
• Any network featuring more than 1 MFD must have
1 of the displays designated as the data master.
• The data master display will receive data through
NMEA 0183 and / or SeaTalk ng® , and bridge the
data over SeaTalk hs to other networked displays.
Homescreen sharing
• When networked, MFD s can share a homescreen.
Cartography sharing
• The cartography contained on chart cards is
always used in preference to the embedded world
base map when a chart card is inserted into a card
slot.
• Chart card cartography can be shared between
MFD s.
Radar operation
• MFD s support the use of up to 2 Radar scanners
simultaneously.
• The data supplied by a connected Radar
scanner(s) is repeated to any networked displays.
Note: All MFD s must have LightHouse II Release
V12.xx software or later to enable multiple radar
support.
Sonar / DownVision ™ / SideVision ™ operation
• You can connect an external sonar module unit to
the MFD via the SeaTalk
hs
network.
• Sonar and DownVision ™ variant MFD s include
an internal sonar module which enables direct
connection to a compatible transducer.
• You can have multiple active sonar modules
(internal and external) on a network. You must
select the sonar module / channel you want to use
from the Fishfinder application menu.
• The data supplied by the sonar module is repeated
to all networked displays.
Planning the installation
37