- 27 -
9901.00.34DE00; 02.2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
WARNING
Risk of accident due to objects being
ejected.
• Before start-up, check the immediate
vicinity. No item or person may be in
the immediate vicinity.
5.13 Safety instructions - care,
maintenance and repair
WARNING
Risk of accident when performing
maintenance work.
• You should always work with particular
care and never in a hurry.
• When working on the implement that is
coupled to the tractor:
- Wait until the implement has come to
a complete standstill.
- Lower the implement fully.
- Switch off the tractor’s engine.
- Remove the ignition key.
• Before performing work on the
hydraulic system, lower the implement
and depressurize the system.
• When performing care and
maintenance tasks, wear work gloves
and the prescribed work clothing.
• All tasks must be performed using
suitable tools.
• Always disconnect the power before
starting any work on the electrical
system (e.g. lighting).
• Disconnect the implement from the
tractor before welding work.
• Secure the implement to prevent
unauthorized start-up while such work
is in progress.
WARNING
Risk of accident due to pinching or
crushing while performing adjustment,
care, maintenance and repair work.
• Turn off the tractor’s engine and
remove the key from the ignition.
• Only perform work on the raised
implement when it is in a safe condition
and has been secured to prevent it
lowering and rolling away.
Use all provided supports.
• During all work, wear work gloves, the
prescribed work clothing and protective
equipment.
• If the implement is folded, use
additional means to secure it to prevent
it unfolding unintentionally.
- Close the provided shut-off valves,
engage the mechanical locks.
Risk of accident due to failure to
perform maintenance tasks or not
doing so properly.
• Replace self-locking nuts with new
ones during reassembly.
• Do not replace self-locking nuts with
normal nuts.
• Inspect the spring washers during
reassembly, and replace with new ones
if necessary.
• Never replace shear bolts with
standard bolts.
• Only replace nuts and bolts with those
of the same strength class, e.g. 8.8.
• Observe the tightening torques.
• Check the tyre pressure regularly.
• Perform a regular visual inspection of
the brake systems for damage and
leaks.
• Only use original spare parts.
Risk of injury due to heavy
components.
• When handling heavy components,
use suitable lifting devices or seek the
assistance of a second person.
Risk of accident due to defective
brake systems (depending on the
equipment).
Improper repairs to the brake systems
cause the brakes to fail and result in
serious accidents.
• Adjustment and repair work on brake
systems may only be performed by
individuals with the proper technical
training or by service centres.
Risk of accident due to improperly
carried out work on tyres and wheels.
Removing and installing wheels requires
thorough expertise and approved
mounting tools.
• Repairs to tyres and wheels may only
be carried out by service centres.
