- 61 -
9901.00.34DE00; 02.2017
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
NOTE - RJR DEPTH CONTROL
WHEEL
When using an RJR depth control wheel,
no lighting can be installed.
A plough with an RJR depth control wheel
is not permitted to be driven on roads.
19.3 Check before moving off
•
The parking support is folded in and secured
- see chapter "Sliding in and folding up the
parking support" - page 48.
•
All hydraulic control devices are locked (tractor
operating instructions).
•
The bottom link lateral lock is applied (tractor
operating instructions).
•
The lighting is installed.
•
Indicators, tail lights and reversing lights are
working.
•
The pick-up arm is folded into the transport
position (pick-up arm operating instructions).
20 M
OVING
THE
PLOUGH
FROM
THE
TRANSPORT
POSITION
TO
THE
WORKING
POSITION
DANGER
General risk of accident while working
with the implement.
• Observe chapter "Safety instructions -
general usage" - page 23 under all
circumstances.
Danger of tipping when folding and
unfolding implement parts.
• Only fold and unfold implement parts
on level ground.
DANGER
Electric shock due to overhead power
lines.
• When lifting implements and folding/
unfolding implement parts, ensure that
VXI¿FLHQWFOHDUDQFHLVOHIWIRUSRZHUOLQHV
Required work
•
Remove the lighting.
•
Turn the ploughs with combination wheel into
the working position.
•
Lower the plough with depth control wheel into
the working position.
•
Release the swivelling limiter.
•
Move the subsoiler into the working position.
20.1 Removing the lighting
1.
2.
3.
4.
5.
Ź
1.) Pull out the lighting cable plug.
Ź
3.) Unscrew the star grip screw.
Ź
4.) Remove the spring cotter.
Ź
2.) Pull the locking pins out and ...
Ź
5.) ... Remove the lighting bar.
To store the locking pin:
1
2
3
Ź6FUHZWKHVWDUJULSVFUHZ
1
) tight.
Ź,QVHUWWKHORFNLQJSLQ
2
) into the
frame tube and secure with the
spring cotter (
3
).
