- 68 -
9901.00.34DE00; 02.2017
Subject to technical modifications
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
Adjusting the working depth hydraulically
a
Ź
Actuate the tractor hydraulics for the
depth adjustment hydraulic cylinder
until the required working depth has
been reached.
Ź
The adjusting scale (
a
VLPSOL¿HVDGMXVWPHQW
= Retract adjustment cylinder
= Increase working depth
= Extend adjustment cylinder
= Decrease working depth
22.1.5 Depth adjustment, RJR wheel
1
1
Ź
Adjust the working depth by rotating the limit
stops (
1
).
Adjust both limit stops evenly.
= Rotate to the right limit stop
= Increase working depth
= Rotate adjusting spindle to the left
= Decrease working depth
22.2 Aligning the plough parallel to the
ground
Adjustment instructions
After checking that the plough is parallel to the
ground, check it’s incline to the ground.
Preparation
Ź
Lower the plough onto the contact or
combination wheel.
Ź
Plough for another metre.
Ź
Check that the plough is parallel to the ground
(visual inspection).
Adjustment
2
1
a
Position the plough parallel
to the ground,
to do this:
Ź
Adjust the bottom link height (
1
).
The bottom link must slope downwards slightly
towards the implement.
Ź
Set the top link (
2
) shorter or longer.
7KHWRSOLQNVKRXOG
- slope upwards slightly towards the implement.
-
make contact slightly forward on level ground
and when ploughing in an elongated hole (
a
).
