- 72 -
9901.00.34DE00; 02.2017
Subject to technical modifications
O
PERATION
S
UPER
A
LBATROS
140 MW; S
ERIES
2
24 A
DJUSTING
THE
EQUIPMENT
24.1 Adjusting the trash boards
Tools
2 x spanner with a width of 19 mm
Torque spanner
Adjustment instructions
•
Do not adjust trash boards too deep to avoid
VORZLQJGRZQWKHVRLOÀRZWRRPXFK
•
If the soil is crumbling, the trash boards are
only needed to scrape off the upper furrow
crown. Adjust the working depth and the plough
speed.
a
•
The “trash board” should be resting against the
mouldboard on the front (
a
).
Adjustment
1.
2.
3.
4.
Ź
1.) Undo the locking nuts.
Ź
2.) Adjust the height of the trash boards in the
holder's elongated holes.
Ź
3.) Tighten the locking nuts to the correct
torque.
Ź
4.) Adjust the support bolts to contact.
Torque
Size
Quality grade
10.9
:LGWKDFURVVÀDWV
(*DIN ISO 272)
Nm
lb-ft
M12
137
101
19 (18*)
24.2 Adjusting the subsoiler
Tools
2 x ring spanners with a 24 mm width
Torque spanner
Adjustment instructions
T
Adjustable working depth
T = approx. 13.5 cm to approx. 21.5 cm in 3 cm
steps
NOTE
Take note of the shear bolt's position and
screw-in direction.
Adjustment
1.
2.
4.
5.
6.
a
a
3.
Ź
1.) Remove the pivot bolt.
Ź
2.) Remove the shear bolt.
Ź
3.) Adjust the subsoiler's height by setting
offsets in the connection points (
a
).
Ź
4.) Insert the pivot bolt from the subsoiler.
Ź
5.) Insert the shear bolt from the subsoiler.
Ź
6.) Tighten the threaded connection to the
correct torque.
