Rabe Super Albatros 140 RMW+ Скачать руководство пользователя страница 25

Страница: 25 / 118

- 25 -

9901.00.34DE00; 02.2017

6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV

PERATION

UPER

LBATROS

140 MW; S

ERIES

5.6 Ballast

calculation

WARNING

Danger of accidents due to incorrectly

FRQ¿JXUHGEDOODVWRIIVHW

,QFRUUHFWO\FRQ¿JXUHGRUPLVVLQJEDOODVW

offset may negatively affect the steering,
braking and stability of the tractor.

• The tractor/implement combination

must never be used without the
calculated front or rear ballasting.
See the appendix for the calculation
formulae.

• Never use the tractor/implement

combination if the weight or axle load
exceeds the permitted values for the
tractor or tyres.

5.7 Safety instructions - coupling/uncoupling

WARNING

Risk of accident while coupling the
implement to and uncoupling it from
the tractor.

• During coupling and uncoupling, no

person may stand between the tractor
and the implement.

• Do not step between the tractor and the

implement while operating the external
hydraulics control.

• Take note of all crushing and shearing

points on all of the implement’s moving
parts.

- Before coupling and uncoupling

the hydraulic plug couplings,
depressurize the hydraulic system.
Follow the tractor’s operating
instructions and safety instructions.

• Prior to uncoupling:
• Wait until the implement has come to a

complete standstill.

- Lower the implement fully.

- Use the implement’s supporting

elements.

- Apply the tractor's parking brake.

- Switch off the engine.

- Remove the ignition key.

• Secure the implement to prevent it

rolling away (brake, wheel chocks).

5.8 Hydraulic safety instructions

WARNING

5LVNRIDFFLGHQWGXHWRK\GUDXOLFÀXLG

escaping at high pressure.

The hydraulic system is under high

SUHVVXUHK\GUDXOLFÀXLGPD\HVFDSH

when connecting or disconnecting
hydraulic lines.

• When connecting or disconnecting,

make sure that the hydraulic systems
on the tractor and on the implement
have been depressurized!

Risk of accident due to operating

errors caused by improperly
connected hydraulic lines.

Incorrectly connected hydraulic lines may
result in malfunctions and serious injury or
death.

• Connect the hydraulic lines to the

prescribed connections.

Risk of injury and infection due to

K\GUDXOLFÀXLGSHQHWUDWLQJWKHVNLQ

Fluids (hydraulic oil) escaping under high
pressure may penetrate the skin and
cause severe injury.

• Consult a doctor immediately in case of

injury.

• Check hydraulic lines regularly and

replace if damaged or showing signs of
ageing.
Only use original spare parts.

• Use suitable tools when looking for

leaks.

• Park the implement, depressurize

the system, switch off the engine
and remove the ignition key before
commencing work on the hydraulic
system.

5.9

Pressure tank safety instructions

DANGER

Danger of explosion when carrying
out welding or soldering work on the
pressure tank.

• Welding or soldering on the pressure

tank is not permitted.

Содержание Super Albatros 140 RMW+























































































































Результаты поиска

Содержание Super Albatros 140 RMW+

Отзывы:

Похожие инструкции для Super Albatros 140 RMW+

Бренды по названию

Популярные бренды

Rabe Super Albatros 140 RMW+, Руководство по эксплуатации

Результаты поиска

Содержание Super Albatros 140 RMW+

Отзывы:

Похожие инструкции для Super Albatros 140 RMW+

Бренды по названию

Популярные бренды