Quantum SNC 4000, Руководство пользователя

Страница: 44 / 164

38 Maintenance Action Plans
NA NA NA ADIC Management Console failure 7
NA NA NA Service terminal connection failure 8
Generic Event Descriptions
8 2 0 Sense data recorded following a check
condition
CAUTION: Normally, the host system
will request and process send data and
then perform error recovery.
0
9 1 0 LUN reports a “unit attention” condition on a
non-removable media device 0
11 1 1 ADIC Management Console reports a
temperature change (event message
indicates the change to High, Very High,
Reduced, to High, or OK 4
13 1 1 SNC is shutting down as requested by the
ADIC Management Console
(a Restart was requested) 0
14 0 0 Additional status information used for
diagnostics 0
16 1 1 A SCSI bus reports an unexpected interrupt 1
17 1 1 FC interface reports a LIP reset was
received from a host 0, 2
18 1 1 FC interface reports a system error 2
19 1 1 FC interface reports an error processing a
request 2
20 1 1 FC interface reports an error processing a
response 2
21 1 1 SNC processor memory fault detected 1, 2, 3
22 1 10 FC interface detected a LIP 2
23 2 0 FC interface reports a loop up 0
24 2 0 FC interface reports a loop down 0
25 1 1 SNC PCI bus parity error detected 3, 2, 1
26 1 1 SNC PCI interface error detected 3, 2, 1
27 2 0 A device has been added to a SCSI bus 0
28 1 0 A SCSI bus reports a reset has been
detected 0
Table 4 Event Codes and Actions
Event
Code Viewing
Level
1
Default Trap
Threshold
Description Action
2