background image

Installation Guide

MAXTOR SATAII/300 INTERNAL HARD DRIVE

ACK SIDE

PN: 20300101

One gigabyte, or GB, equals one billion bytes when referring to hard drive capacity. One terabyte, or TB, equals 1,000 gigabytes when referring to hard drive capacity. Accessible capacity may

vary depending on operating environment and formatting. Quantitative usage examples for various applications are for illustrative purposes and are based on the following assumptions: each

hour of DVD-quality video is 2.1GB, each digital photo is 1MB, and each MP3 is 4 minutes long. Actual quantities will vary based on various factors, including file size, file format, features and

application software. Specifications subject to change without notice.

© 2006 Seagate, Seagate Technology. MaxBlast, Maxtor, and the Maxtor Stylized logo are registered trademarks of Seagate Technology LLC. Mac, the Mac logo, are trademarks of Apple

Computer, Inc., registered in the U.S. and other countries. Microsoft, Windows and the Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United

States and/or other countries. Other trademarks are the property of their respective holders. Actual product may vary from photo shown. 

Seagate Technology, 920 Disc Drive, Scotts Valley, CA 95066 U.S.A. 

 

Содержание SATAII/300 INTERNAL HARD DRIVE




















Отзывы: