Quantum SNC 4000, Руководство пользователя

Страница: 45 / 164

SNC 4000 User’s Guide 39
29 1 1 SNC has added a device to its configuration
table.
CAUTION: The trap is held off until
the SNC has been up for 60 seconds
0
30 1 1 SNC has removed a device from its
configuration 0, 1, 2
31 2 0 SNC logging service has started 0
33
3
1 1 An interface has detected a bus fault
(event message indicates the specific
interface) 1, 2
34
3
1 1 An interface has detected a device fault
(event message indicates the specific
interface) 1, 2
35 1 1 A SCSI interface reported an unexpected
disconnect by a device 1
36 1 1 A parity error was detected on a SCSI bus 1
37 2 0 FC port database change detected 0
39 1 1 Directory server on Fabric has changed 0
40 1 1 Maximum LUN limit has been exceeded 10
41 1 0 FC transfer failure.
CAUTION: error recovery may have
succeeded
0
42 1 1 Maximum device limit has been exceeded
(persistent Address Map database is full) 10
43 1 1 FC interface driver reported debug file dump
(event log contains further information) 13
58 1 1 Power has returned to Nominal from
Warning or Alarm Stage 0
59 1 1 Power has entered Warning Range from
Nominal Range (Power falling) or Alarm
Range (Power improving) 5
60 1 1 Power has entered Alarm Range 5
61
4
1 1 Inlet Air, Outlet Air, or I/O Processor
temperatures have entered Nominal Range
from a Warning or Alarm Range 0
62
4
1 1 Inlet Air Temperature has entered Warning
Range from Nominal Range (heating up) or
Alarm Range (cooling down) 4
63 1 1 Inlet Air Temperature has entered Alarm
Range 4
Table 4 Event Codes and Actions
Event
Code Viewing
Level
1
Default Trap
Threshold
Description Action
2