Quantum SNC 4000, Руководство пользователя

Страница: 93 / 164

SNC 4000 User’s Guide 87
sysVpdShowAll Display Vital Product Data for all subsystems
targets List all known target devices
uptime Display time since last boot
See User’s Guide for more infomation
value = 39 = 0x27 = ‘’’
hlthChkHelp
The
hlthChkHelp
command displays a list of the Health Check commands.
SNC4000 > hlthChkHelp
hlthChkIntervalGet - Show Check Interval
hlthChkIntervalSet <interval> - Set Check Interval
hlthChkLevelGet - Show Check Level
hlthChkLevelSet <level> - Set Check Level
hlthChkNow - Run Health Check Now
See User’s Guide for more information
value = 0 = 0x0
hlthChkIntervalGet
The current Health Check interval can be viewed using the
hlthChkIntervalGet
command. The
example below shows the current interval is 60 minutes.
SNC4000 > hlthChkIntervalGet
value = 60 = 0x3c = '<'
hlthChkIntervalSet
The Health Check interval controls how often the Health Check process runs. The interval may range from
1 to 65,535 minutes (about 45 days). Set the interval using the
hlthChkIntervalSet
command.
SNC4000 > hlthChkIntervalSet 60
value = 0 = 0x0
hlthChkLevelGet
To display the current Health Check level, use the
hlthChkLevelGet
command. The example below
shows that the current level is 2.
SNC4000 > hlthChkLevelGet
value = 2 = 0x02
hlthChkLevelSet
To set the Health Check level, use the
hlthChkLevelSet
command. The example below shows setting
the level to 3.
SNC4000 > hlthChkLevelSet 3
value = 0 = 0x0
hlthChkNow
The
hlthChkNow
function causes the SNC 4000 to execute an immediate, level 4 Health Check. Results
are displayed that will indicate which devices or subsystems failed the check.