Promise Technology VessRAID 1740s Скачать руководство пользователя страница 43

Страница: 43 / 324

Chapter 3: VessRAID Setup

Make the needed changes the same as in step 5.

After you have set the last (extreme right) digit, press the

button.

The display says

Save Network Setting?

Press the

button to confirm.

The display shows the new IP address you set.

Making Automatic IP Settings

To make Management Port settings automatically:

Press the

button until the display says

Management Port

Press the

button and the display says

Link Status Up

If it says

Link Status Down

, reconnect to the network before preceding.

Press the

button and the display says

DHCP Disable.

Press the

button to make a change.

Press the

button to Enable.

Press the

button to confirm.

The display shows the new IP address set by the DHCP server.

This completes the Management Port setup.

Содержание VessRAID 1740s





































































































































































































































































































































Результаты поиска

Содержание VessRAID 1740s

Отзывы:

Promise Technology VessRAID 1740s, Руководство по эксплуатации продукта, Страница: 43 / 324

Результаты поиска

Содержание VessRAID 1740s

Отзывы: